Canon FAX-B840 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 68

Canon FAX-B840 Скачать руководство пользователя страница 65

65

9

SOLUTI

ONS TO COMMON PROBL

E

MS

CHECK DOCUMENT

The document is not set in the document
tray.

Set the document you are trying to
send or copy (see p. 24) and start
again.

CHECK PAPER SIZE

The size of the paper in the multi-purpose
tray and that specified in the PAPER
SIZE setting are different.

Load the correct paper size or change
the PAPER SIZE setting (see p. 51).

CHECK PRINTER

There may be an obstruction that is not
allowing the cartridge holder mechanism
to move.

Check for any obstruction (paper clip,
small object, etc.) and also that the
orange protective cap and tape are
removed from the BJ cartridge. Check
also for a paper jam and clear the jam
if necessary (see p. 55). Then press
[Stop] and start again.

The BJ cartridge may be defective.

Press [Stop]. Reinstall the BJ
cartridge (see p. 11) and start again.

In either case, if the error does not
clear, try unplugging the fax. Wait
several minutes, then plug it back in.
Also, try replacing the BJ cartridge
with a new one (see p. 58).

The waste ink tank (which holds the ink
used for print head cleaning) may be full.

Contact your local authorised Canon
dealer or the Canon help line to have
the waste ink tank replaced
immediately.
Clear the paper jam (see p. 55).

During printing, the BJ cartridge print
head may have become too hot.

Allow the fax to cool down. The fax
will resume printing when it has
cooled down.

CLEAR PAPER JAM

There is a paper jam.

Clear the paper jam (see p. 55) and
reload paper in the multi-purpose tray.
Press [Stop].

DATA ERROR

An error has occurred and all one-touch
speed dialling, coded speed dialling, and
user data have been lost.

Press [Start/Copy], then re-register
the data (see Chapter 2).

DOC. TOO LONG

The document is longer than 700 mm.

Use a copier to make a reduced copy
of the document and then send the
copy.

ECM RX

The fax is receiving a document using
Error Correction Mode (ECM).

Turn off ECM if you need to receive
quickly, or if you know your local lines
are in good condition (see ECM RX,
p. 51).

Message

Cause

Action

«
...
63
64
65
66
67
...
»

Содержание FAX-B840





































































Отзывы:

Нет отзывов