Canon FAX-B820, Руководство по обслуживанию

Страница: 38 / 66

#1 SSSW
SW06 (Service Soft Switch06; Setting Scanning Condition)
Bit Function 1 0
0 Not in use No Yes
1 Pre-scan before scanning the document No Yes*
2 Limit on Length of Document No Less than 1meter *
3 Not in use
4 Not in use
5 Not in use
6 Copy Resolution Selectable Fixed *
7 Not in use
[Bit 0]
It is possible to set the machine to deliver the document after DES (Document Edge Sensor) is activated.
* If [No] is sleeted, it would lead to a blank space at the edge of the printout because start of
scanning document is delayed (by the length corresponding to the distance that the document not
being delivered.)
[Bit 1]
It is possible to set the machine to pre-scan when the machine starts scanning the first page of the document.
* If [No] is selected, the machine pre-scan only when the machine is turned ON.
If [Yes] is selected, the machine pre-scan when the machine is turned ON and when the machine
starts pre-scanning the first page of the document.
[Bit 2]
It is possible to set the limit on the length of the document.
If copying or sending the document whose length is 1m or longer, please select [No]
* If [No] is selected, the machine is unable to detect (document) paper jam.
[Bit 5]
When memory copying the banner paper-size document, it is possible to select copying only the first page of the
document or to divide the document into pieces to copy.
1-33