Canon F-718SG, Инструкция пользователя

Страница: 35 / 40

35
Start? Input the lower limit of X (Default =1).
End? Input the upper limit of X (Default = 5).
*End value must be greater than the start value.
Step? Input the increment step (Default =1).
3. Input the start, end & step information
• Input the value, press to confirm on the following
screens
• Input expression and display result value in following
screens are in Line mode status
• There are maximum of 30 x-values for generate function
table. The “Insufficient MEM” will be showed if you input
the start, end, step value combination is more than 30
x-values.
In Function Table Result screen, you cannot edit the
content, and press return to Function Input screen.
Example: to generate the function table for
the range , incremented in steps of 1.
You should input:- Display screen
f ( x) = x
3
+ 3x
2
2x
f(x)=
f(x)= X 3 +3X 2 -2X
Display Key in operation