Canon EOS RP, Руководство для продвинутых пользователей

Страница: 41 / 612

41
Charging the Battery
z
Upon purchase, the battery is not fully charged.
Charge the battery before use.
z
Charge the battery on the day before or on the day it is to be
used.
Even during storage, a charged battery will gradually drain and lose its
capacity.
z
After charging the battery, remove it and disconnect the
charger from the power outlet.
z
When not using the camera, remove the battery.
If the battery is left in the camera for a prolonged period, a small amount
of power current will keep being released, resulting in excess discharge
and shorter battery life. Store the battery with the protective cover
attached. Storing the battery when it is fully charged may lower the
battery performance.
z
The battery charger can also be used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/60 Hz
power source. If necessary, attach a commercially available plug adapter
for the respective country or region. Do not attach any portable voltage
transformer to the battery charger. Doing so may damage the battery
charger.
z
If the battery becomes exhausted quickly even after having
been fully charged, the battery has reached the end of its
service life.
Check the battery’s recharge performance (
=
381) and purchase a new
battery.
o
After disconnecting the charger’s power plug, do not touch the prongs for
approx. 5 sec.
o
The provided charger cannot charge any battery other than Battery Pack LP-
E17.