95
Advanced Guide
Basic Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Customizing the Information Displayed
●
Follow steps 1 – 2 in “Customizing
[Custom display 1] or [Custom display 2],
and then press the [
] button.
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose information to display, and
then press the [ ] button to add a [ ]
mark.
●
To see an example of display, press the
[
] button to return to the [Screen
info/ toggle settings] or [VF info/ toggle
settings] screen.
●
For a smaller grid pattern, access [
1] tab > [Shooting
information display] > [Grid display].
●
The following settings are available by choosing [
1] tab >
[Shooting information display] > [Histogram].
-
Switch from a brightness histogram to an RGB histogram.
-
Reduce the size of the histogram displayed.
Configuring Touch & Drag AF
Still Images
Movies
With Touch & Drag AF, you can move the AF frame by touching or
dragging the screen while looking through the viewfinder.
1
Access the setting screen.
●
Choose [Touch & drag AF settings] on the
[ 2] tab, and then press the [ ] button
Customizing Controls and
Display
Customizing Display Information
Customize what screen is displayed when you press the [
] button
on the shooting screen. You can also customize what information is
displayed.
1
Access the setting screen.
●
On the [ 1] tab, choose [Screen info/
toggle settings] or [VF info/ toggle
settings] in [Shooting information display],
and then press the [ ] button (
2
Configure the setting.
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose any screen you prefer not
to display, and then press the [ ] button
to remove the [ ] mark. Pressing the [ ]
button again will add the [ ] mark, which
indicates that it is selected for display.
●
To return to the menu screen, press the
[
] button.
●
An example of display with the options selected in step 2 is shown
at left for reference.
●
Display cannot be configured with all [
] marks cleared, or with
only [INFO. Quick Control] selected.