Canon EOS C700 Скачать руководство пользователя

Страница: 147 / 250

147

Clip/Photo Operations

Deleting

Marks or

Marks

1 Select the desired clip (

142)

• In the clip list select a clip with an

mark.

2 Delete the clip mark (

mark).

[OPTIONS]

[Delete

Mark] or [Delete

Mark]

[OK]

• Alternatively, you can press an assignable button set to [Delete

Mark] or [Delete

Mark] (

127).

• The selected clip mark will be removed from the clip.

3 When the confirmation screen appears, press [OK].

Deleting Clips and Photos

You can delete clips and photos you are not interested in keeping, except for XF-AVC clips with an

mark. To

delete such clips, delete the

mark beforehand (

147).

1 Select the desired clip or photo (

142)

2 Delete the clip or photo

[OPTIONS]

[Delete]

3 Press both [DELETE] buttons simultaneously.

• The clip or photo will be deleted.

4 When the confirmation screen appears, press [OK].

IMPORTANT

• Be careful when deleting clips and photos. Deleted recordings cannot be recovered with the camera.

Deleting the User Memo and GPS Information

1 Select the desired clip (

142).

2 Delete the user memo.

[OPTIONS]

[Delete User Memo]

3 Press both [DELETE] buttons simultaneously.

• The user memo and GPS information will be deleted from the clip.

4 When the confirmation screen appears, press [OK].

Содержание EOS C700



























































































































































































































































Результаты поиска

Содержание EOS C700

Отзывы:

Похожие инструкции для EOS C700

Бренды по названию

Популярные бренды

Canon EOS C700, Инструкция по эксплуатации

Результаты поиска

Содержание EOS C700

Отзывы:

Похожие инструкции для EOS C700

Бренды по названию

Популярные бренды