Canon EOS C500 Mark II, Инструкция по эксплуатации

Страница: 55 / 241

55
Recording Video and Photos
Right side of the screen
4
Double slot recording (
A
47). 2: [Recording Mode]
Recording operation
STBY,
Ü
REC Clip recording: record standby, recording.
S&F STBY,
S&F
Ü
REC
Slow & fast motion recording (
A
114): record standby, recording.
PRE STBY,
PRE
Ü
REC
Pre-recording (
A
116): record standby, recording.
`
Recording command (
A
143, 144). 2: [Rec Command]
00.00P, 00.00i Frame rate (
A
63).
When slow & fast motion recording is activated, the shooting frame rate is also
displayed (000/00.00P).
2: [Frame Rate]
U
Genlock (
A
97).
• Displayed only when an optional EU-V1 Expansion Unit 1 or EU-V2 Expansion
Unit 2 is attached to the camera.
2: [Genlock]
00:00:00.00 / 00:00:00:00
R, P, F, E Time code (
A
93).
Time code status (
A
94).
2: [Time Code]
Power supply level indicator 2: [Remaining Battery]
è é
ê ë
(in red)
000 min
Remaining battery charge of a BP-A60 (supplied) or BP-A30 (optional) Battery Pack
and estimated remaining usage time (in minutes).
• When is displayed, replace the battery pack with a fully charged one.
• Depending on the conditions of use, the actual battery charge level may not be
indicated accurately.
DC IN 00.0V Power supply voltage when using an AC adapter.
• When the voltage falls below the selected low-power warning level ( A 189),
the voltage will be displayed in red.
è é
ê ë
000%,
00.0V
Remaining battery charge of a commercially available V-mount battery.
• Available only when the optional EU-V2 Expansion Unit 2 is attached to the
camera.
• Depending on the battery used, the battery charge level cannot be indicated as
a percentage. In that case, the voltage will be displayed instead.
• When the power level falls below the selected low-power warning level
(
A
189), the percentage or voltage will be displayed in red.
7
Photo recorded on the SD card (
A
52). 2: [Photo]
(in red) No SD card or cannot record photos on the SD card.
Icon/Display Description Custom Display
0000x0000 Resolution (
A
62). 2: [Resolution/
Color Sampling]
00 bit,
YCC422 00 bit Color depth, color sampling (
A
62).
MON. terminal disabled / HDMI OUT terminal active (
A
143). 2: [Output Terminals
Status]
T
(in red) Output onscreen displays (
A
145). 2: [OSD Output]
^
(in yellow) Magnification (
A
82). 1: [Magnification]
J
,
K
(in yellow) Peaking (
A
82). 1: [Peaking]
Icon/Display Description Custom Display