Canon EOS C100, Инструкция по эксплуатации

Страница: 45 / 166

3
45
Recording
Recording Video
This section explains the recording basics. Before you begin recording, make a test recording first to check if the
camcorder operates correctly. Record for approximately 15 minutes at the default bit rate, 24 Mbps (LPCM)
(
A
51). Should the camcorder fail to operate correctly, refer to Troubleshooting (
A
144).
For details on recording audio, refer to Recording Audio (
A
74).
Preparing to Record
1 Attach the handle unit, grip unit, etc. as necessary to build the desired
configuration (
A
29).
2 Attach a charged battery pack to the camcorder ( A 22).
3 Insert an SD card into an SD card slot (
A
39).
• Insert another SD card into the other SD card slot to use relay recording
(
A
41) or double slot recording (
A
41).
4 Attach a lens (
A
29).
5 Adjust the viewfinder.
Recording
1 Set the
Q
switch to CAMERA ( A 24).
• The camcorder turns on in mode and enters record pause
mode.
• At first, both SD card access indicators will illuminate in red. After a
moment, the access indicator of the SD card slot selected for
recording will turn green and the other access indicator will go out.
Operating modes:
Rear tally lamp
Access indicators
COP
Y