Canon EOS 77D, Инструкция по эксплуатации

Страница: 205 / 502

205
Set exposure compensation if the exposure (without flash) does not
come out as desired. This feature can be used in Creative Zone modes
(except <
a
>). You can set the exposure compensation up to ±5 stops*
in 1/3-stop increments.
If the <
a
> mode and ISO Auto are both set, see page 198 to set the
exposure compensation.
* In Live View shooting/movie shooting, or when [
s
: Shooting screen ] is set to
[ Guided ], exposure compensation can be set up to ±3 stops.
1
Check the exposure level indicator.

Press the shutter button halfway (
0
)
and check the exposure level indicator.
2
Set the compensation amount.

While looking at the viewfinder or
LCD panel, turn the <
5
> dial.

If it cannot be set, set the <
R
>
switch downward, then turn the <
5
>
dial.
 For exposure compensation, the
<
O
> icon will be displayed in the
viewfinder and on the LCD monitor.
3
Take the picture.

To cancel the exposure
compensation, set the compensation
amount back to <
E
>.
Setting the Desired Exposure Compensation
N
Increased exposure
for a brighter image
Decreased exposure
for a darker image

If [
z
2: Auto Lighting Optimizer ] (p.175) is set to any setting other than
[ Disable ], the image may still look bright even if a decreased exposure
compensation for a darker image is set.

The set exposure compensation level will not be applied to movie shooting.

When you set the power switch to <
2
>, the exposure compensation
setting will be canceled.

After setting the exposure compensation amount, you can set the
<
R
> switch upward to prevent the exposure compensation amount
from changing inadvertently.

The exposure compensation amount displayed in the viewfinder and on
the LCD panel goes up to only ±2 stops. If the exposure compensation
amount exceeds ±2 stops, the end of the exposure level indicator will
display <
I
> or <
J
>.

If you want to set exposure compensation exceeding ±2 stops, setting it
with [
z
2: Expo.comp./AEB ] (p.206) is recommended.