Canon EOS 650D, Инструкция по эксплуатации

Страница: 294 / 376

294
Custom Functions are organized into four groups based on the function
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn
IV: Operation/Others.
3
Custom Function Settings
N
C.Fn I: Exposure
C.Fn-1 Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is effective
when you prefer to control the exposure in less fine increments than 1/3-
stop increments.
C.Fn-2 ISO expansion
0: Off
1: On
When you set the ISO speed, you will be able to set “ H ” (equivalent to
ISO 25600) for still photos and “ H ” (equivalent to ISO 12800) for movies.
Note that if [ C.Fn-3: Highlight tone priority ] is set to [ 1: Enable ], “ H ”
cannot be set.
With setting 1, the exposure level will be displayed in the viewfinder and on
the LCD monitor as shown below.
www.devicemanuals.eu www.devicemanuals.eu
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is effective
when you prefer to control the exposure in less fine increments than 1/3-
www.devicemanuals.eu
C.Fn-2 ISO expansion
www.devicemanuals.eu
When you set the ISO speed, you will be able to set “
ISO 25600) for still photos and “
C.Fn-3: Highlight tone priority
www.devicemanuals.eu
With setting 1, the exposure level will be displayed in the viewfinder and on