Canon EOS 600D Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 328

Canon EOS 600D Скачать руководство пользователя страница 26

26

1

Remove the protective cover.

Detach the protective cover provided
with the battery.

2

Attach the battery.

As shown in the illustration, attach the
battery securely to the charger.

To detach the battery, follow the
above procedure in reverse.

3

Recharge the battery.
For LC-E8

As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.

For LC-E8E

Connect the power cord to the
charger and insert the plug into the
power outlet.

X

Recharging starts automatically and
the charge lamp turns orange.

X

When the battery is fully recharged,
the full-charge lamp will turn green.

It takes approx. 2 hours to fully recharge a completely exhausted
battery at 23°C / 73°F. The time required to recharge the battery
depends on the ambient temperature and the battery’s charge level.

For safety reasons, recharging in low temperatures (6°C - 10°C /
43°F - 50°F) will take a longer time (up to 4 hours).

Charging the Battery

LC-E8

LC-E8E

«
...
24
25
26
27
28
...
»

Содержание EOS 600D









































































































































































































































































































































Отзывы:

Нет отзывов