background image

ENG-12

Tips on Using the Image Stabilizer

The Image Stabilizer cannot compensate for a 

blurred shot caused by a subject that moved.

Set the STABILIZER switch to OFF when you 

are taking pictures using the Bulb setting (long 

exposures). If the STABILIZER switch is set to 

ON, the Image Stabilizer may introduce errors.

The Image Stabilizer might not be fully effective 

in the following cases:

•  You shoot from a violently moving vehicle.

•  You move the camera dramatically for a 

panning shot in Mode 1.

•  You shoot using techniques other than 

following shots in Mode 2.

The Image Stabilizer consumes more power 

when set at ON than normal shooting at OFF, 

resulting in fewer shots and a shorter movie 

shooting time.

The Image Stabilizer operates for about two 

seconds even when your finger is off the 

shutter button. Do not remove the lens while 

the stabilizer is in operation. This will cause a 

malfunction.

With the EOS-1V/HS, 3, ELAN 7E/ELAN 

7/30/33, ELAN 7NE/ELAN 7N/30V/33V, ELAN II/

ELAN II E/50/50E, REBEL 2000/300, IX, IX Lite/

IX7, and D30, the Image Stabilizer will not work 

during self-timer operation.

Using a tripod also stabilizes the image. 

However, depending on the kind of tripod and 

shooting conditions, sometimes it may be better 

to turn off the Image Stabilizer function.

Even with a monopod, the Image Stabilizer will 

be as effective as during hand-held shooting. 

However, depending on the shooting conditions, 

there are cases in which the Image Stabilizer 

may be less effective.

The Image Stabilizer also operates when the 

lens is used with the EF12 II/EF25 II Extension 

Tube, and the EF1.4X III/EF2X III Extender.

Depending on the camera there may be image 

shake, such as after releasing the shutter. 

However, this does not affect shooting.

If you use the camera’s Custom Function to 

change the assigned button to operate the AF, 

the Image Stabilizer will operate when you press 

the newly assigned AF button.

Содержание EOS 5D Mark IV + 70-200mm




















Отзывы: