Shooting Operation
Shutter button
<
n
> Metering mode selection/
White balance selection button
<
o
> AF mode selection/
Drive mode selection button
<
m
> ISO speed
setting/Flash exposure
compensation button
Mode Dial
<
5
> Quick
Control Dial
Access lamp
<
D
> Flash
button
<
6
> Main Dial
<
S
> AF point
selection button
<
A
> AE lock button
<
p
> AF start button
Focus mode switch
Power/Quick Control Dial
switch
<
9
>
Multi-controller
Viewfinder Information
LCD Panel
Aperture
ISO speed
ISO speed
AEB
Exposure level indicator
Drive mode
Image-recording quality
Shots remaining
Flash exposure
compensation
AF mode
White balance
Shutter speed
Spot metering
circle
AF points
Focus
confirmation light
Aperture
Max. burst
AE lock
Flash-ready
Exposure level indicator
Shutter speed
Flash exposure
compensation
Monochrome shooting
Monochrome shooting
Metering mode
Battery check
zx
bn
OK
NG
Nomenclature
All the settings necessary for
shooting are set automatically. You
just press the shutter button, and
the camera does the rest.
Press <
9
> straight down, then tilt
<
9
> to select the function.
Turn the <
6
> or <
5
> dial to set
the function.
Basic Zone Modes
In Basic Zone Modes
If necessary, the built-in flash will pop-up automatically in low-light
or backlit conditions (except in the <
3
> <
5
> <
7
> modes).
D
Using the Built-in Flash
Creative Zone Modes
Press the <
D
> button to pop up
the built-in flash, then shoot.
Basic Zo
ne
(Displayed only when <
C
> is set.)
1
Full Auto
C
Creative Auto
2
Portrait
3
Landscape
4
Close-up
5
Sports
6
Night Portrait
7
Flash Off
Set the Mode Dial to <
d
>.
You can change the camera settings
as desired to shoot in various ways.
The camera automatically sets the shutter speed and aperture
in the same way as the <
1
> mode.
Creative Zone Modes
d
: Program AE
* Set the power switch to <
J
>.
Set the Mode Dial to <
s
>.
Turn the <
6
> dial to set the desired
shutter speed, then focus the subject.
The aperture will be set automatically.
If the aperture display blinks, turn the
<
6
> dial until it stops blinking.
Set the Mode Dial to <
f
>.
Turn the <
6
> dial to set the desired
aperture, then focus the subject.
The shutter speed will be set
automatically.
If the shutter speed display blinks, turn
the <
6
> dial until it stops blinking.
s
: Shutter-priority AE
f
: Aperture-priority AE
Crea
tiv
e Z
o
n
e
Press the <
S
> button, then look
through the viewfinder.
The AF point selection will change
in the direction you tilt the <
9
>.
If you keep tilting it in the same
direction, it will toggle between
manual and automatic AF point
selection.
When all AF points light up, automatic
AF point selection will be set.
When you turn the <
6
> or
<
5
> dial, the AF point selection
will change in the respective
direction.
S
AF Point
N
Set the lens focus mode switch to
<
f
>.
Press the <
o
> button,
then turn the <
6
> dial.
X
(One-Shot AF):
For
still
subjects
9
(AI Focus AF):
Switches the AF mode automatically
Z
(AI Servo AF):
For moving subjects
f
: AF Mode
N
Press the <
m
> button, then
turn the <
6
> dial.
ISO 100 to 3200 can be set in
1/3-stop increments.
When “
A
” is selected, the ISO
speed is set automatically. When
you press the shutter button
halfway, the ISO speed setting
will be displayed.
i
: ISO Speed
N
Press the <
o
> button, then
turn the <
5
> dial.
u
:
Single shooting
o
:
High-speed continuous
shooting
i
:
Low-speed continuous
shooting
j
:
10-sec. self-timer*
l
:
2-sec. self-timer
* This drive mode <
j
> can be set in
all shooting modes.
i
Drive Mode
N
Select [
6
Live View function
settings
].
Set [
Live View shoot.
] to
[
Enable
].
Press the <
A
> button to display
the Live View image.
A
Live View Shooting
N
Press the <
p
> button to
focus.
Press the shutter button to take
the picture.
Battery Life with Live View Shooting
Temperature
No
Flash
50%
Flash
Use
At 23°C / 73°F
Approx. 180 shots
Approx. 170 shots
C.Fn I: Exposure
1 Exposure level
increments
2 ISO speed setting
increments
3 ISO expansion
4 Bracketing auto cancel
5 Bracketing sequence
6 Safety shift
7 Flash sync. speed in Av
mode
C.Fn II: Image
1 Long exposure noise
reduction
2 High ISO speed noise
reduction
3 Highlight tone priority
4 Auto Lighting Optimizer
C.Fn III: Autofocus/Drive
1 Lens drive when AF
impossible
2 Lens AF stop button
function
3 AF point selection
method
4 Superimposed display
5 AF-assist beam firing
6 Mirror lockup
7 AF Microadjustment
C.Fn IV: Operation/Others
1 Shutter button/AF-ON
button
2 AF-ON/AE lock button
switch
3 Assign SET button
4 Dial direction during
Tv/Av
5 Focusing screen
6 Add original decision
data
7 Assign FUNC. button
Custom Functions
