Canon EOS 400D Digital, Руководство по обслуживанию

Страница: 22 / 212

General Information
17
3．DESIGN SPECIFICATIONS
(Specifications different from the EOS KISS DIGITAL N are
indicated in blue.)
1．Type
1-1 Type: Digital AF/AE single-lens reflex camera with built-in flash
1-2 Compatible lenses:
Canon EF and EF-S lenses
1-3 Lens mount:
Canon EF mount
1-4 Lens restrictions:
None
1-5 Lens focal length:
Equivalent to 1.6 the normal lens focal length
2．Image Sensor
2-1 Type:
High-sensitivity, high-resolution, single-plate, CMOS sensor
2-2 Image sensor size:
22.2 mm×14.8 mm
2-3 Effective pixels:
Approx. 10.10 megapixels: 3904 (H)×2598 (V) pixels
2-4 Total pixels:
Approx. 10.50 megapixels: 3996 (H)×2622 (V) pixels
2-5 Pixel unit: 5.7μm square
2-6 Aspect ratio: 2:3 (Vertical:Horizontal)
2-7 Color filter type: RGB primary color filters
2-8 Low-pass filter:
Fixed position in front of the image sensor
2-9 Dust-delete feature:
⑴Sensor cleaning: Auto (Menu)
・ The Self Cleaning Sensor Unit removes the dust adhering
to the low-pass filter. Operation time is about 1 sec.
・ The self-cleaning can be enabled or disabled by setting
"Clean when the power switch is turned 〈ON〉 or 〈OFF〉" to
[Enable] or [Disable]. Self-cleaning can also be performed
immediately by selecting [Clean now].
⑵Dust Delete Data (Menu)
・ The coordinates of the dust adhering to the low-pass filter
is detected by a test shot and the data is appended to the
shooting data.
・ The Self Cleaning Sensor Unit operates automatically
before the test shot is taken.
・ The dust coordinates appended to the shooting data is used
by the bundled software to automatically erase the dust spots.
⑶ Sensor cleaning: Manual (Menu)
・ Possible when a Battery Pack or AC adapter is used.
・ If the Battery Pack's power is inadequate or if BG-E3 size-
AA batteries are used, manual cleaning will not be possible.
・ During manual cleaning with the reflex mirror locked up,
the LCD monitor will indicate that sensor cleaning is in
progress.
・ When the battery level is low, the following warnings are
given: ①Beeper sound (It will sound even if [Beep] is set to
[Off]).
②Warning message displayed on LCD monitor until
the prohibited voltage is reached.