49
3
Setting the Time Code
Time code
You can append the time code to a movie that was output from
HDMI. This is convenient for proxy editing after the movie output
from HDMI is recorded to an external recording device (p.54).
[
On
]: Time code is appended to the HDMI output image.
[
Off
]: Time code is not appended to the HDMI output image.
Recording command
When you record a movie that is output from HDMI to an external
recording device, you can synchronize the camera’s movie shooting
start/stop with the external recording device’s recording operation.
[
On
]: Synchronize external recording device’s recording start/stop
with camera’s movie shooting start/stop.
[
Off
]: Control external device’s recording start/stop from external
recording device.
HDMI
If the movie-recording quality’s frame rate (p.36) and HDMI output frame
rate are set manually to NTSC and PAL frame rates in a combination that
does not function properly, the time code will not be appended to the HDMI
output image.
Downloaded From camera-usermanual.com Canon Manuals