Canon EOS-1, Инструкция по эксплуатации, Страница: 106 / 120

106
Troubleshooting
If you run into a problem operating your camera, check the following table
to see if you can find the cause of the problem. If the trouble persists, take
the camera to your nearest Canon service center. (A list of service cen-
ters is provided at the back of this instruction book.)
The main switch is set to
.
The battery is exhausted.
The battery is inserted
upside down.
The main switch is set to
.
The film is not loaded cor-
rectly. (The film transport
(wind/rewind) (
) is
blinking in the LCD panel.)
The main switch is set to
.
The quick control dial
switch is not set to
.
The lens’ focus mode
switch is set to
M .
Custom function F-4 is set
to 1.
The main switch is set to
.
The film is not loaded cor-
rectly. (The film transport
(wind/rewind) (
) is
blinking in the LCD panel.)
A roll of rewound film is still
in the camera. (The film
rewind completion (
.) is
blinking in the LCD panel.)
Set the main switch to A or
.
Replace the battery with a
new one.
Reload the battery correct-
ly.
Set the main switch to A or
.
Remove the film and
reload it correctly.
Set the main switch to A or
.
Set the quick control dial
switch to
.
Set the lens’ focus mode
switch to
AF .
Press AE lock button to
autofocus, or set custom
function F-4 to 0 and press
shutter button halfway.
Set the main switch to A or
.
Remove the film and
reload it correctly.
Remove the exposed film
and load a new roll.
Symptom Cause Remedy
Nothing appears in the
LCD panel.
The automatic film load-
ing function does not
operate.
The camera settings
cannot be changed.
Autofocusing does not
operate.
The shutter does not
release.
16
14
14
16
23
16
10
18
82
84
16
23
25
Referral
page
00. Part.7 RS (E) (P.106~120) 27-01-2003 12:42 Page 106