Canon EF16-35mm f/4l IS USM, Инструкция по эксплуатации

Страница: 6 / 14

ENG-5
1. Mounting and Detaching the Lens
See your camera’s instructions for details on
mounting and detaching the lens.
The lens mount has a rubber ring for enhanced
dust- and water-resistance. The rubber ring may
cause slight abrasions around the camera’s lens
mount, but this will not cause any problems. If the
rubber ring becomes worn, it is replaceable by a
Canon Service Center at cost.
● ●
After detaching the lens, place the lens with
the rear end up to prevent the lens surface and
contacts from getting scratched.
● ●
If the contacts get soiled, scratched, or have
fingerprints on them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
● ●
If the contacts get soiled or have fingerprints on
them, clean them with a soft cloth.
● ●
If you remove the lens, cover it with the dust
cap. To attach it properly, align the lens mount
index and the

index of the dust cap as shown
in the diagram, and turn clockwise. To remove it,
reverse the order.
COP
Y