Canon EF-S18-55mm f/3.5-5.6 IS STM, Инструкция по эксплуатации

Страница: 10 / 15

ENG-9
You can use the image stabilizer in AF or MF
mode.
This function provides optimal image stabilization
depending on shooting conditions (such as
shooting still subjects and following shots).
1
Set the STABILIZER switch to ON.
● ●
If you are not going to use the image stabilizer
function, set the switch to OFF.
2
When you press the shutter button halfway,
the Image Stabilizer will start operating.
● ●
Make sure the image in the viewfinder is stable,
then press the shutter button the rest of the way
down to take the picture.
● ●
The Image Stabilizer cannot compensate for a
blurred shot caused by a subject that moved.
● ●
The Image Stabilizer may not be fully effective
if you shoot from a violently shaking vehicle or
other transportation.
● ●
The Image Stabilizer consumes more power
than normal shooting, resulting in fewer shots
and a shorter movie shooting time.
● ●
When shooting a still subject, it compensates for
camera shake in all directions.
● ●
It compensates for vertical camera shake during
following shots in a horizontal direction, and
compensates for horizontal camera shake during
following shots in a vertical direction.
● ●
When you use a tripod, the Image Stabilizer
should be turned off to save battery power.
● ●
Even with a monopod, the Image Stabilizer will
be as effective as during hand-held shooting.
However, depending on the shooting conditions,
there are cases in which the Image Stabilizer
effect may be less effective.
● ●
The image stabilizer function also operates when the
lens is used with an extension tube EF12 II or EF25 II.
● ●
The Image Stabilizer will operate even when you
press the button assigned to the AF function with
the camera’s Custom Functions.
Image Stabilizer
5