manualshive.com logo in svg

Canon DVD CAMCORDER DC410, Инструкция по эксплуатации

Поделиться
Скачать
Canon DVD CAMCORDER DC410 Скачать руководство пользователя страница 83

Additional Information

 • 83

Condensation

Moving the camcorder rapidly between 
hot and cold temperatures may cause 
condensation (water droplets) to form 
on its internal surfaces. Stop using the 
camcorder if condensation is detected. 
Continued use may damage the 
camcorder.

Condensation may form in the following 
cases:

• When the camcorder is moved quickly 

from cold to warm places

• When the camcorder is left in a humid 

room

• When a cold room is heated rapidly

• Do not expose the camcorder to 

sudden or extreme changes in 
temperature.

• Remove the disc and memory card 

and the camcorder in an airtight 
plastic bag. Let the camcorder adjust 
to temperature changes slowly before 
removing it from the bag.

• If a disc is loaded, remove the disc 

immediately and leave the disc cover 
open. Leaving the disc in the 
camcorder may damage it.

• A disc cannot be loaded when 

condensation is detected.

The precise time required for water 
droplets to evaporate will vary 
depending on the location and weather 
conditions. As a general rule, wait for 
2 hours before resuming use of the 
camcorder.

Using the Camcorder Abroad

Power Sources

You can use the compact power adapter 
to operate the camcorder and charge 
battery packs in any country with power 
supply between 100 and 240 V AC, 50/
60 Hz. Consult a Canon Service Center 
for information on plug adapters for 
overseas use.

Playback on a TV Screen

You can only play back your recordings 
on TVs compatible with the PAL system. 
PAL (or the compatible SECAM system) 
is used in the following regions/
countries:

Europe: 

All of Europe and Russia.  

Americas:

 Only in Argentina, Brazil, 

Uruguay and French territories (French 
Guiana, Guadeloupe, Martinique, etc.)  

Asia:

 Most of Asia (except in Japan, the 

Philippines, South Korea, Taiwan and 
Myanmar).  

Africa:

 All of Africa and 

African islands.  

Australia/Oceania:

 

Australia, New Zealand, Papua New 
Guinea; most Pacific islands (except for 
Micronesia, Samoa, Tonga and US 
territories like Guam and American 
Samoa).

T

O

 

AVOID

 

CONDENSATION

 

W

HEN

 

CONDENSATION

 

IS

 

DETECTED

 

R

ESUMING

 

USE

 

Downloaded From VideoCamera-Manual.com Manuals

Содержание DVD CAMCORDER DC410
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды