Canon DS810 - SELPHY Color Inkjet Printer Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 44

Canon DS810 - SELPHY Color Inkjet Printer Скачать руководство пользователя страница 31

LG=10 Hungarian

LG=11 Polish

20: Wiping count (WP = Wiping)

21: Camera Direct Print-supported device connection record (CDIN: Camera Direct Insert)

LG = Legacy (Canon Bubble Jet Direct), PB = Canon PictBridge, OPB = Other PictBridge

22: Bluetooth-supported device connection record (BTIN = Bluetooth Insert)

23: Longest period of non-printing (MSD: Maximum Stop Date)

24: Number of pages fed (total, plain paper, High Resolution Paper & Matte Photo Paper, Photo Paper Pro & Photo Paper Plus Glossy

& Photo Paper Plus Semi-gloss, Glossy Photo Paper, postcard)

25: Camera Direct print pages in total (CDPAGE: Camera Direct PAGE)

26: Borderless print pages

27: L & 4x6 print pages

28: Number of times dot count is reset (DCR: Dot Count Reset)

The number of times ink counter reset is performed (OK is clicked) at Ink Low Warning 2 or 3.

29: Number of times dot count reset is cancelled (DCRC: Dot Count Reset Cancel)

The number of times ink counter reset is cancelled at Ink Low Warning 2 or 3.

30: Print head temperature

31: Inside temperature

32: Line inspection information (FF: Factory Function) (Not used in field service)

33: Other Photo Paper pages fed (Not used in field service, as the DS810 does not support Other Photo Paper.)

34: Bluetooth printing pages fed (BrnB=Print Beam) (not counted for Bluetooth printing only)

35: Print Beam printing pages fed (PrnB: Print Beam) (by IRDA & Bluetooth printing)

36: Photo Sticker pages fed

37: Name card- / Credit Card-sized paper pages fed

38: Number of times a memory card is used

39: Memory Card Direct print pages in total

40: Memory Card Direct print pages: Photo Paper Pro (L/4x6, Japanese postcard)

41: Memory Card Direct print pages: Photo Paper Plus Glossy (L/4x6, Japanese postcard)

42: Memory Card Direct print pages: Matte Photo Paper (L/4x6, Japanese postcard)

43: Camera Direct print pages: Photo Paper (L/4x6, Japanese postcard)

44: Camera Direct print pages: Fast Photo Paper (L/4x6, Japanese postcard)

45: Camera Direct print pages: Matte Photo Paper (L/4x6, Japanese postcard)

HDEEPROM

46: Version

47: Serial number

48: Lot number

49: Print head ID

50: Ink ejection level (C/M/Y)

To the top

<Part 1: 3. REPAIR 4>

«
...
29
30
31
32
33
...
»

Содержание DS810 - SELPHY Color Inkjet Printer













































Отзывы:

Нет отзывов