Canon DS126061, Инструкция по эксплуатации

Страница: 41 / 168

41
1
Using Full Auto
5 Take the picture.
¡
Compose the shot and press the
shutter button completely.
s
The captured image will be displayed
for about 2 sec. on the LCD monitor.
¡
To view the images recorded on the
CF card, press the <
x
> button.
(p.103)
¡
While focusing with < AF >, do not touch the focusing ring at the front of
the lens.
¡
If you want to zoom, do it before focusing. Turning the zoom ring after
achieving focus may throw off the focus.
¡
When the CF card becomes full, the CF Full warning “ FuLL CF ” will
appear in the viewfinder and on the LCD panel and shooting will be
disabled. Replace the CF card with one that has room.
¡
If something obstructs the built-in flash from popping up, “ Err 05 ” will
blink on the LCD panel. If this happens, turn the <
4
> switch to <
2
>
and set it back to <
1
>.
¡
Using a non-Canon lens with an EOS camera may not result in proper
camera or lens operation.
¡
When focus is achieved, the focus and exposure setting will also be
locked.
¡
If the focus confirmation light <
o
> blinks, the picture cannot be taken.
(p.70)
¡
Multiple AF points may flash simultaneously in red.This indicates that
focus has been achieved at all those AF points.
¡
In the Basic Zone modes (except <
3
> <
5
> <
7
>), the built-in flash
will pop up and fire automatically in low-light or backlit conditions. To
retract the flash, push it back down.
¡
You can disable the beeper from sounding when focus is achieved. (p.90)
¡
The image review time after image capture can be changed with the
menu’s [
x
Review time ] setting. (p.100)
¡
If you want to select the AF point to be used for focusing, set the Mode
Dial to <
d
>, then follow “Selecting the AF Point” (p.67) to select the AF
point.