Canon DR-X10C - imageFORMULA - Document Scanner, Справочное руководство

Страница: 39 / 67

31
2
Basic Operation
• When the Rapid Recovery System is enabled, scanning pauses
when a double feed is detected, and the following error message
is displayed.
■
When the Rapid Recovery System is Disabled
Return the document pages ejected as a result of double-
feed detection to the top of the document stack yet to be
scanned, and resume scanning.
■
When the Rapid Recovery System is Enabled
1.
Check the rejected document page(s).
Hint
• If attached paper, such as a label on the document page,
appears to be the cause of the double-feed detection, ignore
the detection.
• If two document pages were fed together, rescan the double-
fed pages.
2.
Press [ ] or [ ] to select [IGNORE] or [RETRY]
and press the [Enter] key.
[IGNORE]:
Saves the image of the page that was detected as a double
feed, and resumes scanning.
[RETRY]:
The display panel appears as below. Return the double-fed
document pages to the tray and press the Start key.
IMPORTANT
• Press the Start key the erase the image that was being
scanned when double feeding was detected, and resume
scanning.
• Pressing the Stop key saves the images that were scanned
before the double feed was detected to a file, and ends the
scan process. In this case, restart scanning from the
document page where the double feed occurred, or from the
beginning.
When detecting double feeds by document length
When detecting double feeds ultrasonically