manualshive.com logo in svg

Canon DR-2080C Startup, Руководство для стартапов, Страница: 26 / 76

Поделиться
Скачать
Canon DR-2080C Startup Скачать руководство пользователя страница 26

24

Installing the Scanner

USB 2.0 Interface Board

When connecting the scanner via USB, verify that the USB 2.0 interface
board you are using is one recommended for use with the scanner. The
recommended USB 2.0 interface boards are as follows:

Recommended USB2.0 Interface boards

Manufacturer

: Adaptec

Models

: USB2connect2000LP (AUA-2000)

USB2connect3100 (AUA-3100LP)
USB2connect5100 (AUA-5100)
USB2connect for Notebooks (AUA-1420)

Notice

●

When installing the USB 2.0 interface board in your computer, please refer
to the computer user’s guide and follow the instructions provided.

●

Make sure that the USB driver is an updated version provided by Adaptec
or Microsoft.

Note

●

The DR-2080C passed the Hi- Speed USB 2.0 certification test. However,
when you use the scanner with a personal computer equipped with USB 2.0
as standard, the scanner may not always operate normally.

●

If the inerface is not Hi-Speed USB 2.0-compatible, the scanning speed
will slow.

Содержание DR-2080C Startup













































































Отзывы:

Нет отзывов