Setting Up
14
Connecting the Main Unit to Input Devices
The video display has SDI and HDMI input terminals to connect input devices.
CAUTION
•
Check that the power to the video display and input devices is switched off before connecting an input device to this display's SDI
or HDMI input terminal.
•
Use a HDMI cable with the High Speed logo that complies with the HDMI standard. When a non-compliant HDMI standard cable
is used, the video display may not work normally, for example, video becomes choppy or nothing is displayed.
Reference
•
The connection is tested using D5.5UHDC03E BNC cables manufactured by Canare Electric Co.
•
When 3G-SDI RAW signal frequency exceeds 30.00P, it becomes a dual connection.
•
Each input terminal is compatible with through output. When signals are input from Input (IN) A, connect the cable to the SDI (OUT)
terminal of Input A.
SDI input terminal
HDMI input terminal
■
Signals that can be connected to the SDI input terminal
Input signal
Input terminal
Quad Link
(Square Division)
12G/6G/3G/
HD-SDI
Top left, Mapping signal
Input A
Single input system
Top right, Mapping signal
Input B
Bottom left, Mapping signal
Input C
Bottom right, Mapping signal
Input D
Quad Link
(2 Sample Interleave)
3G-SDI
Link 1
Input A
Single input system
Link 2
Input B
Link 3
Input C
Link 4
Input D
Dual Link
6G/3G-SDI
Link 1
Input A
Two input systems
Link 2
Input B
Link 1
Input C
Link 2
Input D
Single Link
12G/6G/3G/HD/
SD-SDI
—
Input A/Input B/
Input C/Input D
Four input systems
