46
Shooting
Reviewing an Image Right after Shooting
Right after a shot is taken, the image appears in the LCD monitor for 2
seconds even if you release the shutter button regardless of whether the LCD
monitor is on or off. You can also review it with the following procedures.
• By keeping the shutter button pressed after a shot.
• By pressing the
button while the image is displayed on the LCD
monitor. Press the shutter button halfway to stop displaying it.
• You can do the following while the image is displayed.
- Check the image brightness in the histogram (p. 32).
- Erase the image (p. 91).
Changing the Review Duration
The default review time is 2 seconds. The review function can be set to
Off or changed to 10 seconds.
• See
Selecting Menus and Settings
(p. 37).
• Use the or button to select [Off],
[2 sec.] or [10 sec.]
• With the Off option, the image will not
automatically display. However, if you
keep the shutter button fully pressed
after a shot, the image will display.
• With the 2 sec. or 10 sec. options, the
image automatically displays for the set
duration even if the shutter button is
released.
• You can display the image longer than
the 2- or 10-second duration by
keeping the shutter button depressed
or by pressing the
button while the
image is displayed.
• Another picture can be taken even
while the last is displayed.
• The display will return to the Rec. menu.
In the
(Rec.) menu,
select
.
*EC118usCUGE_045-061,GM
2/25/02, 2:46 PM
46
