Canon CXDI-1, Руководство по эксплуатации

Страница: 131 / 170

– 123 –
11. Questions and Answers
11.1 Display of Exposure Screen
Q1-1
The exposure screen does not appear on the touchscreen.
A1-1
Reset the system according to the display on the touchscreen.
Contact a Canon representative or distributor if the problem cannot be resolved even after resetting the
system several times.
•
When the Microsoft Windows XP Professional screen is displayed
Select
[start] > [Turn Off Computer] > [Turn Off] .
•
When the exposure screen appears completely black or completely blue without showing anything else
Refer to the hardware manual, and reset the system.
Q1-2
Nothing is displayed on the touchscreen even when the power is turned ON, or the screen has
frozen with the message Checking NV RAM....
A1-2 Refer to the hardware manual, and reset the system.
Q1-3
No operations can be performed from the touchscreen.
A1-3
Operation from the touchscreen will not be accepted while the system is performing a process or when the
system has crashed. Wait for about one minute and try again.
If it still doesn’t work, refer to the hardware manual, and reset the system.
Q1-4
What is the green mark blinking at the upper right side of the exposure screen?
A1-4
It indicates that the image is being transferred or the image is being processed. It disappears after the
process ends.
Q1-5
What are the S and I displayed in the message area of the exposure screen?
A1-5 They are the original IDs issued by the system for DICOM.
Q1-6
What are the small green rectangles in the part where the preview image will be displayed on a
tray type screen after an exposure?
A1-6
The rectangle shows the Fixed ROI area .
For details about the Fixed ROI area , see Setup Guide .
Q1-7
There is no study description button on the exposure screen.
A1-7 Set the Study Description to [ENABLE] . (
→
Setup Guide)
Q1-8
The new exposure mode button that has been made is not displayed on the exposure screen.
A1-8
On the tray type screen, the exposure mode will not be displayed unless it has been POSITION IN TRAY
(
→
Setup Guide) .
Q1-9
The print preview image is not displayed properly on the multiview screen.
A1-9
Refer to 5.4.2 Choosing Multi-Format after the Exposure (
→
page 49) and then set the printer for
output.