manualshive.com logo in svg

Canon CX-G2400, Руководство пользователя

Поделиться
Скачать
Canon CX-G2400 Скачать руководство пользователя страница 45

40

Chapter 1

  

Basic Operation

10

 [Cleaning  Sheet  Transport]

See the manual included with the glossy paper 
for further details.

13

[ Shipping  The  Printer]*

 (P.179)

Clicking this button prepares the printer to be 
transported.

11

 [Micro Margin Adjustment]*

 (P.49)

Clicking this button sets the printer’s trimming 
position and rounded corner size for micro 
margin printing.

14

[ Add Custom Paper Type]*

 (P.86)

Allows the user to adjust ink jetting amounts and 
register them along with the paper type of new 
paper.

12

[ Moving  The  Printer]*

 (P.176)

Clicking this button makes preparations for 
moving the printer indoors.

* Items displayed in the [Utility] tab of the printer properties window.

IMPORTANT

•  The settings that can be configured on the [Utility] tab of the printer properties window are different from those 

that can be configured on the [Utility] tab of the printing preferences window.

•  When configuring settings in the [Utility] tab, the printer must be powered and connected to the computer.

•   Administrative privileges required for certain features

Administrative privileges over this printer are required when 
configuring settings (marked with *) on the [Utility] tab of the printer 
properties window.
If a user without administrative privileges over this printer attempts 
to configure settings, the following message will appear.

If this message appears, contact the administrator of the computer and proceed with operation following the 
procedure below.

1.  Right-click on start and then select Control Panel -> Hardware and Sound -> Devices and printers.

 

Windows 8.1
From the Desktop charms, select Settings -> Control Panel -> Hardware and Sound -> Devices and 
Printers.

 

Windows 7
Select the Start menu -> Devices and Printers.

2.  Right-click on the Printer icon and then select [Printer Properties].

The printer properties window appears.

3.  On the [General] tab, click [Change Properties].

If the [User Account Control] screen appears, enter the password of the administrator of this printer.

Содержание CX-G2400



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды