19
3. Insert the USB cable in the groove on the
printer’s rear panel.
Keep the USB cable from getting in the way of
the feeder lift tray.
IMPORTANT
• The USB cable can be connected or disconnected when the computer and the printer are powered (hot-
swappable). However, do not insert or remove USB cable in the following cases:
- When the computer is being booted (before the desktop screen appears)
- When printing is in progress
- When the printer driver is being installed
• When disconnecting USB cable while the computer and the printer are powered, disconnect the connector on
the computer side (USB hub side). Wait for at least 5 seconds before reconnecting USB cable. Otherwise, the
printer could malfunction.
6
Turn on the printer.
Installation will begin when the printer is recognized.
NOTE
• Recognition of the printer may take longer if the computer is used in a network environment.
