4. Adjust the balance of the bottom part of the beak and insert it into the body.
6. Attach and to . Next, glue , , and to .
Once it is balanced, add glue.
Place it on a vertical piece of
paper to adjust the balance.
If the beak side seems too light,
continue adding to the inside
of until it is balanced.
Insert into the back of the body to attach.
Simply attach and do not glue.
5. Assemble and , and and attach each together.
Assembling the tail
Place glue here only.
Attach and so that they
are held between and .
Balance Toy "Yajirobe" (Toco Toucan) : Assembly Instructions
