Attach the Jack-o'-lantern and the joint together.
Attach the Jack-o'-lantern and B21 to the card, and your
Jack-o'-lantern is complete.
Pop-up Card (Halloween / Black cat & Witch) : Assembly Instructions
Katsuyuki Shiga(PinoArt)
Canon Inc.
Page
Make the jack-o'-lantern
Use pattern: Page4, Page5.
Assemble B1, and attach parts B2 through B9.
Assemble B10, and attach parts B11 through B14.
Attach the parts from B15 to B20.
Cut out the triangle shaped part.
Add curves to these parts.
Add curves to these parts.
Attach the areas
indicated in blue.
Assemble
in the same way.
Attach the areas
indicated in blue.
Attach the areas
indicated in blue.
Close and glue together.
After attaching the parts, open and close to check if the card
opens smoothly.
Put glue on this part first.
Open and close to check that it moves.
Add a curve.
