Assemble the front and back wheels
If necessary, cut off the ends.
Cut the rubber band
to make a string.
Tie one end of the band to the band stopper,
and the other end to the middle of the axle.
Assemble the body interior
Assemble as shown in the diagram.
Attach part K to part R.
Attach the axles
Follow the fold line,
and glue together
at the back.
Assemble part S, and attach the area with
the diagonal lines to the inside of the body.
Fit the axles into the grooves of the body.
Check that the wheels spin smoothly.
Attach the tires to both ends of the axle.
Follow the same process to assemble
the back wheels.
*The axle of the back wheels does not
have an rubber band attached.
Elastic-powered Bus : Assembly Instructions
