Canon CP-300 Скачать руководство пользователя страница 25

Страница: 25 / 204

a C
omput

Loading the Print Media

Loading a Tube

IMPORTANT

• Do not use the following types of tubes. Not only will the product not print cleanly, but

use with such tubes may also cause a malfunction.

・

Broken

・

Crushed

・

Twisted

・

Uneven thickness

・

Soiled

・

Uneven

・

Wet

• You cannot print on dirty tubes. Wipe off any dirt or dust with a dry cloth. Also, do not

use tubes that have oil or other stains that cannot be wiped off.

NOTE

• Please purchase commercially available tubes for use. For more information on the sizes

that can be used, refer to

"Print Media (P.192)"

• The procedure for removing set print media from the printer, refer to

"Replacing the Print

Media (P.27)"

• Periodically clean or replace the cleaner of attachment. Dirt on the cleaner will cause

print smears. For details, refer to

"Cleaning/Replacing the Cleaners (P.157)"

Prepare the attachment.

For tubes (round)
Use the cleaner (blue) by attaching it to the tube attachment.

For flat tubes
Use the cleaner (blue) by attaching it to the (optional) plate and flat tube
attachment.

Содержание CP-300













































































































































































































Результаты поиска

Содержание CP-300

Отзывы:

Canon CP-300, Руководство пользователя, Страница: 25 / 204

Результаты поиска

Содержание CP-300

Отзывы: