Canon Color imageCLASS MF8280Cw, Руководство по обслуживанию

Страница: 388 / 401

8
8
8-40
8-40
Service Mode > FAX > Setting of NCU Parameters > BUSY TONE 0
Service Mode > FAX > Setting of NCU Parameters > BUSY TONE 0
■
DIAL TONE
● Bit Switch
Bit No. Function 1 0 M82 M85
Bit 0 Frequency detection method Modem Tonal counter - -
Bit 1 Cadence pattern check Not detected Detected ○ ○
Bit 2 Signal frequency Changed Not changed ○ ○
Bit 3 - - - - -
Bit 4 Judgment of intermittent
signal
start from valid ON
signal
start from either valid
ON signal or OFF signal ○
○
Bit 5 - - - - -
Bit 6 Signal form Continuous Intermittent ○ ○
Bit 7 Signal detection Detected Not detected ○ ○
● Numeric value parameter
Parameter No. Function Setting range M82 M85
01; T0 timer 0 to 9999 (x 10 msec) ○ ○
02; T1 timer 0 to 9999 (x 10 msec) ○ ○
03; T2 timer 0 to 9999 (x 10 msec) ○ ○
04; T3 timer 0 to 9999 (x 10 msec) ○ ○
05; T4 timer 0 to 9999 (x 10 msec) ○ ○
06; Signal detection table 0 to 16 ○ ○
07; Signal detection level 0 to 7 ○ ○
08; Number of signal frequency 0 to 9999 ○ ○
■ 2nd DIAL TONE
Not in use
T-8-33
T-8-34
■
BUSY TONE 0
● Bit Switch
Bit No. Function 1 0 M82 M85
Bit 0 - - - - -
Bit 1 - - - - -
Bit 2 Signal frequency Changed Not changed - -
Bit 3 - - - - -
Bit 4 Judgment of intermittent
signal
start from valid ON
signal
start from either valid
ON signal or OFF signal -
-
Bit 5 - - - - -
Bit 6 Signal form Continuous Intermittent - -
Bit 7 Signal detection Detected Not detected ○ ○
● Numeric value parameter
Not in use
T-8-35