12
Using Digital Functions
Speed Preset
Using Digital Functions
Framing Preset [Zoom]
Memorized zoom speed and direction can be reproduced any time.
Memorized view angle and zoom speed can be reproduced any time.
To use this function, the speed preset function “Sped” should have been assigned to VTR, RET,
or AUX switch in advance (P7).
Setting a specific zoom speed and direction
Operate the zoom rocker seesaw to zoom in the preferred direction (toward telephoto or
wide end) at desired speed. Press the MEMO switch while zooming in to memorize the
direction and speed.
The memorized zoom speed will be applied to the framing preset function as well.
When the “Sped” switch is pressed, the lens will start zooming in the memorized direction
(toward telephoto or wide end) at the memorized speed and stop at the zoom end.
Setting a specific framing position
1
Zoom in a position you want to memorize and keep that position.
2
Press the “Fr1P” switch while pressing down the MEMO switch.
The memorized position will be maintained even after the power is turned off.
Zoom speed to the memorized framing position can be set either to the fastest speed or
the one memorized by Speed Preset. Refer to the operation manual " Information display " for
details.
Moving to the memorized framing position
When the “Fr1P” switch is pressed, the lens will start zooming in and stop at the memorized
framing position.
