Canon CN20x50 IAS H/E1, Руководство по эксплуатации

Страница: 21 / 32

E14
2. Moving to the framing memory position
Once the "Fr1P" switch is pressed, the zoom starts to move toward the framing memory position at the preset
speed and stops at the framing memory position.
3. Canceling the movement to the framing memory position or switching to other zoom operation
Movement to the framing memory position can be canceled by any of the following operations.
[Zoom Framing Preset]
• Press the "Fr1P" switch again.
• Perform zoom operation with the zoom rocker
seesaw.
• Perform zoom operation with the "Shtl" switch.
[Zoom, Focus Framing Preset]
• Operate a connected focus demand. Movement to
the memory position stops, and movement to the
operating position of the focus demand takes place.
1. Setting the framing memory position
Zoom (and focus) to the position that you want to store, while
holding this zoom (and focus) position, and then press the
"Fr1P" switch while holding down the MEMO switch.
This framing memory position is different from the
shuttle memory position.The stored zoom position is
retained even after the power is turned off.
5 OPERATION
Zoom Rocker Seesaw
"Shtl" Switch
"Fr1P" Switch
MEMO Switch