Canon CLC4040, Справочное руководство, Страница: 286 / 524

Department ID Management 6-12
6
Sy
stem M
anage
r Setting
s
4
Enter the new password (up to seven digits) using - (numeric
keys).
❑
Press [Password].
❑
Press [Password]
➞
enter the desired password using - (numeric keys).
❑
Press [Confirm]
➞
enter the same number to confirm the password using - (numeric
keys)
➞
press [OK].
You cannot store a password with only zeros as the number, such as <0000000>. If you
enter a number that begins with zeros, the leading zeros are ignored.
Example: If <02> or <002> is entered, <0000002> is stored.
NOTE
•
If you make a mistake when entering the password, press to clear the password
➞
enter the
correct password.
•
You cannot change the Department ID.
•
If Use Asterisks to Enter Access No./Passwords in System Settings (from the Additional
Functions screen) is set to 'Off', passwords you enter are not displayed as asterisks (********).
(See "Setting the Display Method When Entering a Password," on p. 6-61.)
5
If you want to change or set a page limit restriction, press [Turn Limits
On/Off and Set Page Limits].
6
Change the page limit restriction, if necessary.
❑
Press [On] under the desired function(s).
❑
Press [ ] (Page Limit) next to [On]/[Off] of the desired function(s)
➞
enter the page limit
restriction using - (numeric keys).
❑
Press [OK]
➞
[OK].
If you do not want to set a page limit restriction for a function, press [Off] under the desired
function's name.
NOTE
•
If you make a mistake when entering a number, press to clear the number
➞
enter the correct
number.
•
You can set the page limit from 0 to 999,999 pages. Once a page limit is reached, copying,
scanning, or printing is not possible.
•
The page limit refers to the number of printed surfaces. Therefore, a two-sided print is counted as
two pages.