Canon Cassette Feeding Unit-AM1 Скачать руководство пользователя страница 48

Страница: 48 / 73

Margin Adjustment (Second side)

1. Make 2-sided copies using the Cassette 3 and check that the left edge margin is 2.5 +/- 2.0 mm.

Feeding direction
of paper

image

2. As for nonstandard, change the left edge margin adjustment value for the second side of the 2-sided copy from the

Cassette 3.

Service Mode > COPIER > ADJUST > FEED-ADJ > ADJ-C3RE and set 1 value larger, the left edge margin becomes 0.1mm
larger.

3. Enter the value set to the left edge margin adjustment value for the second side of the 2-sided copy from the Cassette

3 as the left edge margin adjustment value for the second side of the 2-sided copy from the Cassette 4.

Service Mode > COPIER > ADJUST > FEED-ADJ > ADJ-C4RE

4. Make 2-sided copies using the Cassette 4, and check that the left edge margin is 2.5 +/- 2.0 mm.

5. As for nonstandard, change the left edge margin adjustment value for the second side of the 2-sided copy from the

Cassette 4.

As making the following selection: Service Mode > COPIER > ADJUST > FEED-ADJ > ADJ-C4RE and set 1 value larger,
the left edge margin becomes 0.1mm larger.

6. Enter the new adjustment value on the Service Label.

• ADJ-C3RE
• ADJ-C4RE

7. Get out from the service mode.

5. Adjustment

Содержание Cassette Feeding Unit-AM1









































































Результаты поиска

Содержание Cassette Feeding Unit-AM1

Отзывы:

Похожие инструкции для Cassette Feeding Unit-AM1

Бренды по названию

Популярные бренды

Canon Cassette Feeding Unit-AM1, Руководство по обслуживанию

Результаты поиска

Содержание Cassette Feeding Unit-AM1

Отзывы:

Похожие инструкции для Cassette Feeding Unit-AM1

Бренды по названию

Популярные бренды