![background image](http://html.mh-extra.com/html/canon/canoscan-5200-f/canoscan-5200-f_quick-start-manual_62741014.webp)
Scanning Film
14
Scanning Film
The following steps explain how to scan the film with ArcSoft PhotoStudio.
1
Press the power switch on the scanner’s left side to set it the ( I ) position.
2
Start ArcSoft PhotoStudio.
Refer to step 2 on page 8 for procedures.
3
Start ScanGear CS.
Refer to step 4 on page 9 for procedures.
4
Select the [Select Source].
You can select from the following options for films.
Negative Film (Color) / Positive Film (Color)
5
Click [Preview].
ScanGear CS will display the preview image(s).
6
Place a check mark beside the number(s) of the
frame(s) to be scanned.
A check mark only appears beside the first frame by default.
You can scan multiple frames in one step if you place check
marks beside the numbers of each frame you wish to include.
7
Select the [Destination].
You can select [Print (300 dpi)] or [Image display (150 dpi)].
When [Print (300 dpi)] is selected, the output resolution is set
to 300 dpi. When [Image display (150 dpi)] is selected, it is set
to 150 dpi.
[Print (300 dpi)] is selected in this example.