Canon Canon 7, Как пользоваться инструкцией

Страница: 22 / 39

21
Then turn the magazine opening key clockwise to "close," and
return the knob to its former position. Do not turn the magazine
opening key before closing the back cover.
Wind the lever and press the shutter button with the lens cap
on. By doing this twice you will have cleared the two frames
exposed to the light while you were loading ... and the exposure
counter dial will advance to "O" from "S." Wind the lever again
and you are ready for the first shot.
The film is properly loaded and transported if the rewind crank lever rotates when the film wind lever is wound.
If the rewind crank lever does not rotate, it means the film was not loaded properly. If such is the case, take
out the film - as illustrated on pages 23-24 - and reload the film.
After you have finished loading the film, be sure to set the speed of film used on the film speed indicator
window. Refer to page 15 for setting the film speed.