Canon C2050 Скачать руководство пользователя страница 2

Страница: 2 / 292

2000

CANON C2050/2020, C2100/2100S REV.0 NOV. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical

theory, installation, maintenance, and repair of products. This manual covers all

localities where the products are sold. For this reason, there may be information in this

manual that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to

improvements or changes in products. When changes occur in applicable products or in

the contents of this manual, Canon will release technical information as the need arises.

In the event of major changes in the contents of this manual over a long or short period,

Canon will issue a new edition of this manual.

The following paragraph does not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product names and company names used in this manual are the registered

trademarks of the individual companies.

manual may not be copied, reproduced or translated into another language, in whole or

in part, without the written consent of Canon Inc.

Caution

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

Printed in Japan

Imprimé au Japon

Содержание C2050

































































































































































































































































































Результаты поиска

Содержание C2050

Отзывы:

Бренды по названию

Популярные бренды

Canon C2050, Руководство по обслуживанию

Результаты поиска

Содержание C2050

Отзывы:

Бренды по названию

Популярные бренды