Chapter 1
5
F-1-5
4) Push the locking lever [1], and remove the boot
ROM [2].
F-1-6
5) Fit the included boot ROM [1] in place.
F-1-7
6) Attach the main controller box cover using 4
screws.
7) Attach the upper rear cover using 6 screws.
8) Pass the reader communication cable through the
cable clamp, and close the cable clamp.
9) Connect the reader communication cable.
10) Connect the machine's power cable (for the power
outlet).
11) Turn on the main power switch.
3. Checking the Installation
Make the following selections in service mode, and
check the state of the following bit: COPIER >
ACC-STS > PDL-FNC1.
1x1x xxxx xxxx xxxx (0: OFF, 1: ON)
In the case of the PDL-FNC1, bits 31 through 16 are
indicated.
Check to be sure that the following bits are '1': 31,
29.
[1]
[2]
[1]
[2]
[1]
Содержание BW Printer Kit-G2
