Canon BW PCL PRINTER KIT-J1, Процедура установки

Страница: 13 / 16

Chapter 1
5
10) Remove the IP cover [1].
- 10 screws [2]
F-1-11
11) Shift the 2 locking levers [1] back to their initial
position.
F-1-12
12) Connect the connector [1] of the 32MB ROM to
the connector [2] of the IP PCB.
- 1 screw (binding; M3x4) [3]
F-1-13
13) Attach the IP cover you removed in step 10).
When attaching the IP cover, take care not to damage
the grounding plate [2] by the USB port [1].
Also, after attaching the IP cover, check to make sure
that the grounding plate is in firm contact with the
USB port.
F-1-14
14) Put all the parts that you have removed back in
place.
- cable guide
- soft ID cable
- IP-LAN cable (if a UFRII LT PRINTER KIT-J2
is mounted)
15) Attach the LAN cover removed in step 7-1). (if a
[2]
[2]
[2]
[1]
[1]
[1] [2] [3]
[1]
[2] [2]