Canon Bubble Jet Printer i450 Скачать руководство пользователя страница 7

 

4.2. Service mode operation procedures 

1)  Close the access cover, and turn off the printer. While pressing the Resume/Cancel button, press and 

hold the Power button. (The LED lights in green to indicate that a function is selectable.) 

2)  While holding the Power button, release the Resume/Cancel button.   
3)  While holding the Power button, press the Resume/Cancel button 2 times, and then release the Power 

and Resume/Cancel buttons. (In the operation panel, “02” will be displayed. Each time the 
Resume/Cancel button is pressed, the LED lights alternately in either orange or green. During 
initialization, the LED blinks in green.) 

4)  When the LED stops blinking and lights in green, press the Resume/Cancel button the specified number 

of time(s) according to the function listed in the table below. (Each time the Resume/Cancel button is 
pressed, the LED lights alternately in either orange or green.) 

Time(s) LED 

Function 

Remarks 

0 times  Green 

Power off 

When the print head is not installed, the carriage returns 
and locks in the home position. 

1 time 

Orange  Service test print 

When the Power button is pressed during printing, printing 
stops, and the mode returns to step 4) above. 

2 times  Green 

EEPROM information print 

When the Power button is pressed during printing, printing 
stops, and the mode returns to step 4) above. 

3 times  Orange  EEPROM initialization 

 

4 times  Green 

Waste ink counter resetting 

 

5 times  Orange  Destination settings 

Proceed  to  the following steps 5) and then 6) to set the 
destination. 

6 times  Green 

Print head deep cleaning 

Cleans black and color, simultaneously. 

7 times  Orange  Not used in servicing 

 

8 times 
or more 

Green 

Return to the menu selection

Return to step 4) above. 

 

5)  After the function (menu) is selected, press the Power button. The LED lights in green, and the selected 

function is performed. (When the operation completes, the printer returns to step 4) above.) 

 

<Destination setting> 

6)  Press the Resume/Cancel button the specified number of time(s) according to the destination listed in 

the table below, and then the Power button. 

Time(s) LED 

Destination 

1 time 

Orange 

Overseas: 

i450 

2 times 

Green 

Japan: 

PIXUS 450i 

 

 

7

Содержание Bubble Jet Printer i450














Отзывы: