Canon BJC6500 - BJC 6500 Color Inkjet Printer, Руководство по обслуживанию, Страница: 61 / 115

2.4 Resetting the EEPROM
The EEPROM stores such information as function settings, total sheets passed with the
Black/Color or Photo/Color cartridges, total waste ink absorbed, and the last three
errors recoverable only by service personnel. Because the waste ink full error is based
on the data of the total waste ink absorbed as stored in the EEPROM, the Waste Ink
Counter must be cleared whenever the waste ink absorber has been replaced. If the
control board has been replaced, the new EEPROM must also be initialized and the
waste ink absorber replaced.
2.5 Setting the Model
The control board of this printer is a common component for different printers. If you
have replaced the control board, it is necessary to set the model setting as initial
information. After selecting the model, by pressing the
POWER button , the selection will
be validated. (Each time the RESUME button is pressed, the beeper will sound once.)
Times Indicator Model
0 times Lights in Green BJ F6100
1 time Lights in Orange BJC-6500
2 times or more ... BJC-XXXX (reserved for OEM)
After setting the model, perform the service/factory test printing for confirmation.
2.6 Checking the Presence of Ink
When this function is enabled, the printer will check for ink in the ink storage
chamber, and print out the results.
This function can be used to confirm correct operation of the Ink Sensor.
(1) Install an ink tank (with an empty ink storage chamber) into the Color BJ cartridge.
(2) Select this function, and print out the results.
(3) Confirm that a value of "0" is returned for the empty ink tank.
2.7 Conducting the Print Head Position Adjustment
The print head position adjustment can be performed off-line (without being connected
to a computer). The printer will perform the print head position adjustment in the
same way as if the user initiated the adjustment from the computer via the printer
driver utility.
2.8 Powering Off and Locking the Carriage
When this function is enabled, regardless of whether BJ cartridges are installed in the
carriage, the printer will move the carriage to the home position and, after locking the
carriage, power off. When transporting the printer for service when no BJ cartridge is
present, in order to lock the carriage, this function can be used.
(1) Enter Service Mode.
(2) Press the
RESUME button
7 times.
(3) Open the front cover and remove the BJ cartridge(s).
(4) Press the
POWER button .
3-11
BJC-6500 Part 3: OPERATION
OPERA
TION
ExistInkY = 0 ExistInkM = 1 ExistInkC = 0 ExistInkm = 1 ExistInkc = 1 ExistInkK = 0
03F1,03F1,03F1,03F1,03F1,03F1
Yellow, Magenta, Cyan Ink Tanks Black Ink Tank
Photo-Magenta, Photo-Cyan, Photo-Black Ink Tanks
Figure 3-7 Checking for Presence of Ink