Canon BJC-S820D, Быстрый старт, Страница: 17 / 103

10
Basic Printing
4.
Align the stack with the right side of the sheet feeder, then insert the stack
into the printer.
5.
Slide the paper guide right to the edge of the stack.
To load T-Shirt Transfers:
1.
Set the paper thickness lever to the right, towards the
envelope mark.
2.
Slide the paper guide completely to the left and raise
the paper rest.
3.
Load the T-Shirt Transfer with the printing side (side
without the green line) facing up.
4.
Slide the guide right to the edge of the sheet.
To load envelopes:
1.
Set the paper thickness lever to the right,
towards the envelope mark.
2.
Slide the paper feed guide completely to the left.
3.
Press down on the corners and sides of the
envelopes to make them as flat as possible by
expelling all of the air in them. To avoid paper
jams, make sure the envelopes are flat before
you load them into the sheet feeder.
4.
With the address side facing up and pointed
down, align the stack with the right side of the
sheet feeder, then insert the stack into the printer.
5.
Slide the paper guide right to the edge of the envelope.
•
Load only one T-Shirt Transfer at a time.
•
Transfer the image to the T-Shirt as soon as possible. See the
instructions provided with the T-Shirt Transfers.
If the edges of the envelopes are not sharp, crease them with the
side of a pen. Make sure that none of the flaps are overlapping. You
can load up to 10 standard #10 envelopes in the sheet feeder.
Paper thickness lever
Paper thickness lever
S820D QSG.book Page 10 Tuesday, October 23, 2001 12:34 PM