manualshive.com logo in svg

Canon BJC-S6300, Руководство пользователя, Страница: 78 / 189

Поделиться
Скачать
Canon BJC-S6300 Скачать руководство пользователя страница 78

Print Head Cleaning

78

Routine Maintenance

5

Select the ink nozzles to be cleaned, and then click OK.

All Colours: All nozzles
Black:

Black ink nozzles

Colour:

Colour ink nozzles

■

Cleaning the Print Head from the Printer

This operation cleans all nozzles, both black and colour. Because this method also resets 
the printer, any print data stored in the printer is lost.

1

Ensure the printer is on.

2

Hold down the RESUME/CANCEL button until the POWER lamp flashes 
once.

Now the POWER lamp starts flashing and print head cleaning begins. Do not perform any 
other operations until the head cleaning finishes. This takes about 40 seconds.

After print head cleaning finishes, print the nozzle check pattern to verify that the print head 
is clean. If not, repeat print head cleaning. If the head is still not clean after the third 
cleaning, perform print head deep cleaning.

➡

Printing the Nozzle Check Pattern

➡

Print Head Deep Cleaning

Содержание BJC-S6300






























































































































































































Отзывы:

Нет отзывов