Macintosh
Canon USA S200 SH S2.ai
Clarity
7
Check the Nozzle Pattern
With the printer on, place a stack of
blank paper in the paper rest.
Print a nozzle check pattern:
d.
When prompted to print, click
OK.
Macintosh:
a.
From the
File
menu in a software
application, click
Page Setup
.
b.
Click the
Utilities
button.
c.
Click the down-arrow to select
Test Print
.
d.
Click the
Nozzle Check
icon.
e.
When prompted to print, click
OK.
Click
OK
(Windows) or
Close
(Macintosh)
when finished.
Windows:
a.
Click
Start
, then
Settings
, then
Printers
.
b.
Right-click the
Canon S200
icon,
then click
Properties
.
c.
Click the
Maintenance
tab, then
click the
Nozzle Check
icon.
1
2
Examine the printed nozzle check
pattern to check if all colors (yellow,
magenta, cyan and black) are printed,
and all lines are drawn completely.
If there are any inconsistencies in
the colors or patterns, see the
S200 Quick Start Guide for how to
clean the printhead.
3
4
Part no. 0011X040
© 2001 Canon U.S.A. Inc.
Canon, BJ, BCI and Bubble Jet are trademarks of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN USA
After the computer restarts, select the
Apple
menu, then
Chooser.
Click the
S200
icon in the Chooser. The
printer name will highlight and move to
the right panel.
NOTE:
To use the BJ Print Monitor, set the
Backgrounding
button to the
On
position.
Close the Chooser.
8
9
7
6
Open the printer driver folder on the
CD-ROM, then double-click the
Installer
icon.
Read the License Agreement, then click
Accept
if you agree.
Click
Install
. The printer driver will load
automatically.
If the message "No other applications can
be running..." displays, click
Continue
.
When the installation and registration
process has completed, click
Restart
.
NOTE:
Remember to register your product to
ensure product support. The serial number is
located on the inside of the printer, to the
right of the printhead holder.
Be sure the printer is plugged in. Turn
your Mac on, then insert the S200
Setup Software & User's Guide CD-ROM.
5
4
3
1
2
When the Printer connection destination
window appears,
PLUG THE PRINTER IN
so the printer port (connection) can be
automatically detected.
The software will begin identifying the
printer port being used.
IMPORTANT
: If your computer cannot
detect a printer port, refer to the
Troubleshooting chapter in the
S200 Quick Start Guide for instructions.
When the Installation Complete window
appears, click
OK.
When the installation and registration
process has completed, click
Exit
. If you are
prompted to restart the computer, click
Yes.
6
7
8
NOTE:
Remember to register your product to
ensure product support. The serial number is
located on the inside of the printer, to the
right of the printhead holder.
Be sure the printer is unplugged and your
computer is turned off before continuing.
Close any open software applications,
including any virus detection programs,
then insert the S200 Setup Software &
User's Guide CD-ROM. The setup program
should run automatically.
NOTE:
For Windows XP
TM
and 2000, log on
to Windows as an Administrator before
continuing.
Driver features and screen shots shown here
may differ from your screen depending on the
version of Windows you are using.
NOTE:
If the setup program does not run,
click
Start,
then
Run,
then type
X:\msetup.exe
,
where
X
is your CD-ROM drive.
Read the License Agreement, then click
Yes
if you agree.
When the main menu appears, ensure that
the Printer Driver is selected, then click
Install.
NOTE:
If you are prompted to restart Windows,
remove the CD-ROM, then click
OK
. After the
computer restarts, insert the CD-ROM and continue.
Turn your computer on.
IMPORTANT
: Click
Cancel
if you see
a screen that says "New Hardware
Found", "Update Device Driver Wizard"
or "Add New Hardware Wizard":
1
2
3
4
5
Windows
6
Install the Printer Driver (Windows
®
)
6
Install the Printer Driver (Macintosh
®
)