Canon BJC-4300 Series, Руководство пользователя, Страница: 35 / 100

Auto Feed Guidelines
When automatically feeding stacks of paper, follow these guidelines:
Do not open the front cover while printing. This may cause paper jams, smudges, or
malfunctions.
Do not leave paper stacked in the printer for long periods of time; longer sheets of
paper may become bent or curled over time. This may cause the paper to misfeed or
jam.
If your printed page contains lots of graphics, the ink on the page may be damp due to
the print density. Remove the page right away and allow the ink to dry.
The capacity of the paper output tray is 20 sheets of paper. To reduce paper jams,
remove paper from the output tray before the count reaches 20.
If paper curls after printing, remove it immediately; otherwise, paper jams may occur.
The platen (a roller on the inside of the printer) may become inked if you print data
beyond the width of the page. If this happens, clean the platen with a soft cloth. (For
details on cleaning the platen, see page 4-3.)
Depending on the density of your printed pages, the ink may need time to dry. Within
two to three seconds, the ink becomes smudge resistant. After drying several minutes,
the ink becomes water resistant.
4300 Chapter 3 Page 10
Do not try to load paper into the sheet feeder beyond the paper limit mark or the tab
on the right side of the sheet feeder; stacking too much paper may cause paper feeding
or printing problems.
Make sure there are no gaps between the stack of paper and the paper guide nor the
right edge of the sheet feeder.