Canon AX-C4343W Скачать руководство пользователя страница 77 | Manualshive

Страница: 77 / 86

background image

Appendix — Technical description —

77

• Prohibited

– Do not operate the product using any type of power supply other than the one indicated

on the rating label.
Otherwise, it could result in fire or electric shock.

– Do not handle the product with wet hands.

You may experience an electric shock that could result in death or serious injury.

– Do not place heavy object on cables and cords, or do not pull, bend, bundle, or step on

them to prevent their sheath from being damaged, and do not alter them neither.
Doing so may damage the cords which could result in fire or electric shock.

– Do not supply power to more than one piece of equipment using the same AC outlet.

Doing so could result in fire or electric shock.

– Do not turn ON the system power when condensation has formed on the product.

Doing so could result in fire or electric shock.

– Do not connect a multiple portable socket-outlet or extension cord to the system.

• Caution

– Always connect the three-core power cord plug to a grounded AC power outlet.

– The units that connect to the supply mains in this product do not have switches to isolate

them from the supply mains. To isolate them from the supply mains, please disconnect
the plug from the electrical outlet.

– To make it easy to disconnect the plug at any time, avoid putting any obstacles near the

outlet.
Otherwise, it may not be possible to disconnect the plug in an emergency.

– Use only the power cord provided with this product.

Otherwise, fire or electric shock may be caused due to leakage.

– Because the product cable is long, take care that cables do not become tangled during

use. Also, be careful not to get your feet caught in the cable.
Otherwise, it may cause a failure of the product or the injury of the user due to tripping
over the cable.

• Prohibited

– Never modify the device in any way.

Doing so could result in fire or electric shock. Also, since the product incorporates parts
that may cause electric shock as well as other hazardous parts, touching them may cause
death or serious injury.
In no event shall Canon be liable for any damages arising from any modifications.

3 Power supply and cables

4 Modifications

000_DIA-2019-019-E03_AX-C4343W.book Page 77 Friday, November 27, 2020 12:38 PM

«
...
75
76
77
78
79
...
»

Содержание AX-C4343W























































































Отзывы:

Нет отзывов

Похожие инструкции для AX-C4343W

Бренд: Bartscher Страницы: 22

Бренд: Daavlin Страницы: 13

Бренд: Daavlin Страницы: 27

Бренд: AAON Страницы: 36

Бренд: Xtool Страницы: 51

Бренд: H-TEC Education Страницы: 16

Бренд: H-TEC Education Страницы: 12

Бренд: Mangar International Страницы: 8

Бренд: Malvern Instruments Страницы: 30

Бренд: zarges Страницы: 36

RZN 43-E Series

Бренд: D+H Страницы: 2

Бренд: GE Страницы: 289

INTEGRA ARINC e-NAV

Бренд: Kannad Страницы: 20

Бренд: ATD Tools Страницы: 7

SPLICE-500 MKII

Бренд: Serpent Страницы: 8

Бренд: Wecan Technology and Lighting Co., Ltd Страницы: 4

Бренд: Joyolight Страницы: 4

SynCore RW Unit

Бренд: Ridder Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды