Canon AX-C4343W Скачать руководство пользователя страница 52

Страница: 52 / 86

In order to ensure that the product is used safely and normally, be sure to inspect the
product before use. If any problem is found during the following inspections and cannot
be resolved, please contact your sales representative.

Cable

(1) Ensure that the cables are not damaged and the cable jackets are not torn so as to

expose the inside of the cables.

(2) Ensure that the power cord plugs are securely connected to both the product AC

inlet and the AC outlet.

(3) Ensure that there are no breaks or short-circuits in all pins of the detector connector

plugs.

(4) Ensure that there is no dust, dirt, or oil on the terminals of the wiring cable

connector.

Detector

(1) Ensure that there are no loose or missing screws.

(2) Ensure that there are no break or no deformation on the exterior of the detector.

(3) Ensure that there is no dust or foreign matter on the battery bay connector.

(4) Ensure that there are no breaks or short-circuits in the battery bay connector.

(5) Ensure that there is no dust, dirt, or oil on the terminals of the cable connector.

(6) Ensure that the battery cover is not damaged or bent.

(7) Ensure that there is nothing wrong with the rubber in the battery cover (foreign

objects, tears, cracks, etc.).

After turning on the power

(1) Perform test exposure.

Ensure that captured images are displayed normally on the monitor.

Maintenance and inspection

Daily inspection

WARNING

For safety reasons, be sure to turn OFF the power to the product before

the following. Otherwise, an electric shock could result.

000_DIA-2019-019-E03_AX-C4343W.book Page 52 Friday, November 27, 2020 12:38 PM

Содержание AX-C4343W























































































Результаты поиска

Содержание AX-C4343W

Отзывы:

Похожие инструкции для AX-C4343W

Бренды по названию

Популярные бренды

Canon AX-C4343W, Техническая документация

Результаты поиска

Содержание AX-C4343W

Отзывы:

Похожие инструкции для AX-C4343W

Бренды по названию

Популярные бренды